|
Tài trợ cho PIC Vietnam |
PIC - Thiết kế và Ứng dụng Ý tưởng cho các sản phẩm sử dụng PIC/dsPIC và các sản phẩm của Microchip |
|
Ðiều Chỉnh | Xếp Bài |
26-11-2012, 01:08 AM | #1 |
Nhập môn đệ tử
Tham gia ngày: Nov 2012
Bài gửi: 1
: |
PIC16F877A Mạch đếm số người ra/vào phòng
các bác xem dùm cái code trên sửa thế nào: mình định hạn chế số người đi vào trên 100 thì sẽ không đếm nữa mà khi chạy mô phỏng và chạy ra mạch thật đều ko được, nó đếm hẳn lên mấy ngàn @@:
#include<16f877a.h> #Fuses HS,NOLVP,NOPUT,NOWDT #use delay(clock=12000000) #use fast_io(b) #use fast_io(d) #byte RB = 0x06 #bit RB7 = RB.7 #byte RD = 0x08 #bit G = RD.3 int8 maled[10]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x9 0}; int8 maG[10]={1,1,0,0,0,0,0,1,0,0}; signed int16 i, tram, nghin, chuc,donvi,n=0; int1 s1=0,s2=0; #INT_EXT void demtien() { s1=1; if(s2==1) { i++; if(i==100) i=100;// đoạn này đây ạ! s1=0; s2=0; disable_interrupts(INT_TIMER0); } else { enable_interrupts(INT_TIMER0); set_timer0(0); n=0; } } #INT_RB void ngat() { if(RB7==0) { s2=1; if(s1==1) { i--; if(i<0) i=0; s1=s2=0; disable_interrupts(INT_TIMER0); } else { enable_interrupts(INT_TIMER0); set_timer0(0); n=0; } disable_interrupts(INT_RB); } } #INT_TIMER0 void ngat_timer0() { n++; if(n==220) { n=0; if(((s1==1)&&(s2==0))||((s1==0)&&(s2==1))) s1=s2=0; disable_interrupts(INT_TIMER0); } set_timer0(0); } void hienthi(int16 a) { nghin = a/1000; tram = (a%1000)/100; chuc = ((a%1000)%100)/10; donvi = ((a%1000)%100)%10; //=================== output_high(PIN_D4); output_b((maled[nghin]<<1)|0x81);G=maG[nghin]; delay_ms(1); output_low(PIN_D4); output_b(0xFF); //================ output_high(PIN_D5); output_b((maled[tram]<<1)|0x81);G=maG[tram]; delay_ms(1); output_low(PIN_D5); output_b(0xFF); //=============== output_high(PIN_D6); output_b((maled[chuc]<<1)|0x81);G=maG[chuc]; delay_ms(1); output_low(PIN_D6); output_b(0xFF); //================== output_high(PIN_D7); output_b((maled[donvi]<<1)|0x81);G=maG[donvi]; delay_ms(1); output_low(PIN_D7); output_b(0xFF); } void khoitao() { set_tris_b(0x81); set_tris_d(0x00); enable_interrupts(global); enable_interrupts(INT_EXT); enable_interrupts(H_to_L); enable_interrupts(INT_RB); setup_timer_0(RTCC_INTERNAL|RTCC_DIV_256); i=0; } void main() { khoitao(); while(true) { hienthi(i); if(RB7==1) enable_interrupts(INT_RB); } } |
|
|