new extended range PIC 16f1824

**tetsu-jp** · 05-05-2011, 11:03 AM

This is a new product line introduced recently.
It is based on 16F instruction set.

-Can read FLASH memory via FSR
-Two FSR registers, 16bit
-Linear RAM area (remapped)
-256 bytes RAM, 4K FLASH
-Internal Osc. 32 Khz-32 MHz
-Branching instructions
-Interrupt context saving

and much more!

It is better and easier to use than the older 16F models.
Indeed I do not use them much anymore!
It costs about 1 dollar and I highly recommend it.

On the web there are pages where the 16F84 is used but this model is stone-age so to say!

I made a small PCB including DC/DC converter for 1.2 volts (using the new MCP1640 chip).

The assembly is totally difficult, I do not really want to build and sell them.
If you do not need the DC/DC chip, it's rather easy to do it, and I could set a price of 5 dollars.

This is NOT an advert, as I do not make a living out of this business.
Selling things on eBay is more like a hobby for me!

Here the URL: http://pic.mtfuijitown.info

There are more PIC topics and the 16f1824 information can be found on it's own sub-page.

16f1824 battery powered by yakone syndrome, on Flickr

This PIC needs at least PICKIT3, and the latest MPLAB install.

05-05-2011, 11:03 AM	#1
tetsu-jp Đệ tử 1 túi Tham gia ngày: May 2011 Nơi Cư Ngụ: nước Đức Bài gửi: 18 :	new extended range PIC 16f1824 This is a new product line introduced recently. It is based on 16F instruction set. -Can read FLASH memory via FSR -Two FSR registers, 16bit -Linear RAM area (remapped) -256 bytes RAM, 4K FLASH -Internal Osc. 32 Khz-32 MHz -Branching instructions -Interrupt context saving and much more! It is better and easier to use than the older 16F models. Indeed I do not use them much anymore! It costs about 1 dollar and I highly recommend it. On the web there are pages where the 16F84 is used but this model is stone-age so to say! I made a small PCB including DC/DC converter for 1.2 volts (using the new MCP1640 chip). The assembly is totally difficult, I do not really want to build and sell them. If you do not need the DC/DC chip, it's rather easy to do it, and I could set a price of 5 dollars. This is NOT an advert, as I do not make a living out of this business. Selling things on eBay is more like a hobby for me! Here the URL: http://pic.mtfuijitown.info There are more PIC topics and the 16f1824 information can be found on it's own sub-page. 16f1824 battery powered by yakone syndrome, on Flickr This PIC needs at least PICKIT3, and the latest MPLAB install.