PIC16F676 ! hiển thị điện áp DC trên LED

[Lightning]

Code đây bạn dịch ra File.hex rồi nạp cho vi điều khiển nhé, nói thực tôi không biết cái vụ up lên mạng làm thế nào các bạn thông cảm.

#include <16F676.h>
#device adc=10
#fuses INTRC_IO,NOWDT,PUT,NOPROTECT,BROWNOUT,NOMCLR
#use delay (clock=4000000) // 4MHz clock

#rom 0x3ff={0x3444}

#byte PORTA = 0x05
#byte PORTC = 0x07
#byte TRISA = 0x85
#byte TRISC = 0x87

#define SPORTA PORTA
#define SPORTC PORTC

#define TICKS_BETWEEN_INTERRUPTS 5000 //5000
#define INTERRUPT_OVERHEAD 35
#define TMR1RESET (0xFFFF-(TICKS_BETWEEN_INTERRUPTS-INTERRUPT_OVERHEAD))

const char SegCode[11] = {0x40,0x57,0x22,0x06,0x15,0x0C,0x08,0x56,0x00,0x04 ,0xFF};
// 0 1 2 3 4 5 6 7 8 9
const char Column[3] = {0x02,0x01,0x04};
static char Segment[3] = {0x7f,0x7f,0x7f};
static unsigned char ColCount=0x00;

void CPU_SETUP(void);
void Display(void);
void HTO7S(unsigned int32 Num);

byte i;
unsigned int32 result;

#INT_TIMER1
void Timer1(void)
{
set_timer1(TMR1RESET);
Display();
}

void main()
{
unsigned char i;

CPU_SETUP();

while(true)
{
result=0;
for (i=0;i<20;i++)
{
set_adc_channel(3);
delay_ms(1);
result=result+read_adc();
}
//result = 0x3fe;
HTO7S(result/20);
delay_ms(200);
}

}

void CPU_SETUP()
{

setup_comparator(NC_NC_NC_NC); // not use comparator module
setup_adc_ports( sAN3 | VSS_VDD);
setup_adc(ADC_CLOCK_DIV_64);
TRISA=0b00011000;
PORTA=0x27;
TRISC=0b00000000;
PORTC=0x37;


setup_timer_1(T1_INTERNAL|T1_DIV_BY_1);
set_timer1(TMR1RESET);
enable_interrupts(GLOBAL);
enable_interrupts(INT_TIMER1);
}

//-------------------------------------
// Display routine
//-------------------------------------
void Display()
{
PORTA = 0b00100111; // off all digits column and Segment G
PORTC = 0b00111111; // off segment a-f
delay_cycles(2);


if (ColCount>=3)
ColCount=0;

SPORTC = Segment[ColCount];
SPORTA = ((Segment[ColCount] & 0b01000000)>>1) | (Column[ColCount]^0x07);
ColCount++;
}

//--------------------------------------
// Convet HEX 2 byte to 7-Segment code
//--------------------------------------
void HTO7S(unsigned int32 Num)
{

unsigned int32 res;


Segment[0]=SegCode[30*Num/10230];
if (Segment[0]==0x40)
Segment[0]=0xFF;

res = 30*Num%10230;
Segment[1]=SegCode[10*res/10230];
res=10*res%10230;
Segment[2]=SegCode[10*res/10230];
}