|
Tài trợ cho PIC Vietnam |
Luận văn tốt nghiệp Nếu bạn thắc mắc vì sao chúng tôi muốn phổ biến các luận văn tốt nghiệp? Xin xem tại đây |
|
Ðiều Chỉnh | Xếp Bài |
22-06-2012, 01:30 PM | #1 |
Nhập môn đệ tử
Tham gia ngày: Nov 2011
Bài gửi: 2
: |
ai co the giai thich dum em doan ma code ve con chuong trình RFID
#include <16f877a.h>
//#include <def_16f877a.h> #fuses HS,NOWDT,NOPROTECT,NOLVP,NOBROWNOUT,PUT #define RF_RDY_CLK PIN_C0 // External interrupt used to read clock #define RF_SHD PIN_C1 // High disables the antenna signal #define RF_MOD PIN_C3 // High does 100% modulation #define RF_DEMOD_OUT PIN_C2 // Data read in interrupt service routine #include <em4095.c> // Controls the reader IC #include <em4102.c> // Allows reading 4102 transponders #use delay(clock=12000000) #use rs232(baud=9600, xmit=PIN_c6,rcv=PIN_c7) #define LCD_ENABLE_PIN PIN_B3 //// #define LCD_RS_PIN PIN_B1 //// #define LCD_RW_PIN PIN_B2 //// #define LCD_DATA4 PIN_B4 //// #define LCD_DATA5 PIN_B5 //// #define LCD_DATA6 PIN_B6 //// #define LCD_DATA7 PIN_B7 #include <lcd.c> //#byte trisb = 0x86 //#bit trisb5 = trisb.5 //#byte PORTB = 0x6 //#bit rb5 = PORTB.5 #Byte PORTA = 0x5 #bit Butt1 = PORTA.0 #bit Butt2 = PORTA.1 #bit Butt3 = PORTA.2 #bit Led1 = PORTA.3 #bit Led2 = PORTA.4 #bit Led3 = PORTA.5 #byte PORTE = 0x9 #bit Tran1 = PORTE.0 #bit Tran2 = PORTE.1 #define x_ON 1 #define x_OFF 0 int8 msg[32]; void main() { int8 customerCode; int32 tagNum; //trisb5=0; lcd_init(); set_tris_a(0x7); Set_tris_e(0); rf_init(); // Initialize the RF reader // khoi tao em4095 trong thu vien em4095.c rf_powerUp(); // Power up the antenna // phát sóng tan so 125khz printf(lcd_putc,"\fSystem ready..."); delay_ms(1000); while(1) { if(read_4102(msg)) { customerCode = msg[0];// gan 1byte la ma khach hang tagNum = make32(msg[1], msg[2], msg[3], msg[4]);// gan 4byte tiep theo la UIA sprintf(msg,"Customer Code: %u\n\r", customerCode); puts(msg); printf(lcd_putc,"\fC Code:%u\n",customerCode); sprintf(msg, "Tag Number: %lu\n\n\r", tagNum); puts(msg); printf(lcd_putc,"T No:%lu",tagNum); Led1 = x_ON; Tran1 = x_ON; Tran2 = x_ON; delay_ms(1000); Led1 = x_OFF; Tran1 = x_OFF; Tran2 = x_OFF; } } } |
|
|