Linh kiện USB

**dangnhapweb1** · 01-02-2008, 03:58 PM

Ai quan tâm đến các ứng dụng chuẩn USB xin cùng comment cái này!!thanks
-----------------application lấy từ datasheet-----------------------------------------
Applications
The CY7C68300C/301C and CY7C68320C/321A implement
a USB 2.0 bridge for all ATA/ATAPI-6 compliant mass storage
devices, such as the following:
•Hard drives
•CD-ROM, CD-R/W
•DVD-ROM, DVD-RAM, DVD±R/W
•MP3 players
•Personal media players
•CompactFlash
•Microdrives
•Tape drives
•Personal video recorders
The CY7C68300C/301C and CY7C68320C/321A support one
or two devices in the following configurations:
•ATA/ATAPI master only
•ATA/ATAPI slave only
•ATA/ATAPI master and ATA/ATAPI slave
•CompactFlash only
•ATA/ATAPI slave and CompactFlash or other removable
IDE master

**dangnhapweb1** · 01-02-2008, 04:00 PM

continuous......
Features
•Fixed-function mass storage device—requires no firmware
•Two power modes: Self-powered and USB bus-powered to
enable bus powered CF readers and truly portable USB
hard drives
•Certified compliant for USB 2.0 (TID# 40490119), the USB
Mass Storage Class, and the USB Mass Storage Class
Bulk-Only Transport (BOT) Specification
•Operates at high-speed (480 Mbps) or full-speed (12 Mbps)
USB
•Complies with ATA/ATAPI-6 specification
•Supports 48 bit addressing for large hard drives
•Supports ATA security features
•Supports any ATA command with the ATACB function
•Supports mode page 5 for BIOS boot support
•Supports ATAPI serial number VPD page retrieval for Digital
Rights Management (DRM) compatibility
•Supports PIO modes 0, 3, and 4, multiword DMA mode 2,
and UDMA modes 2, 3, and 4
•Uses one small external serial EEPROM for storage of USB
descriptors and device configuration data
•ATA interface IRQ signal support
•Supports one or two ATA/ATAPI devices
Supports CompactFlash and one ATA/ATAPI device
Supports board-level manufacturing test using the USB I/F
Can place the ATA interface in high impedance (Hi-Z) to
allow sharing of the ATA bus with another controller (i.e., an
IEEE-1394 to ATA bridge chip or MP3 Decoder)
Low-power 3.3V operation
Fully compatible with native USB mass storage class drivers
Cypress mass storage class drivers available for Windows
(98SE, ME, 2000, XP) and Mac OS X operating systems
-----------------------------------------------------
dangnhapweb@gmail.com
dt:0936388943

01-02-2008, 04:00 PM	#2
dangnhapweb1 Đệ tử 1 túi Tham gia ngày: Jan 2008 Bài gửi: 11 :	continuous...... Features •Fixed-function mass storage device—requires no firmware •Two power modes: Self-powered and USB bus-powered to enable bus powered CF readers and truly portable USB hard drives •Certified compliant for USB 2.0 (TID# 40490119), the USB Mass Storage Class, and the USB Mass Storage Class Bulk-Only Transport (BOT) Specification •Operates at high-speed (480 Mbps) or full-speed (12 Mbps) USB •Complies with ATA/ATAPI-6 specification •Supports 48 bit addressing for large hard drives •Supports ATA security features •Supports any ATA command with the ATACB function •Supports mode page 5 for BIOS boot support •Supports ATAPI serial number VPD page retrieval for Digital Rights Management (DRM) compatibility •Supports PIO modes 0, 3, and 4, multiword DMA mode 2, and UDMA modes 2, 3, and 4 •Uses one small external serial EEPROM for storage of USB descriptors and device configuration data •ATA interface IRQ signal support •Supports one or two ATA/ATAPI devices Supports CompactFlash and one ATA/ATAPI device Supports board-level manufacturing test using the USB I/F Can place the ATA interface in high impedance (Hi-Z) to allow sharing of the ATA bus with another controller (i.e., an IEEE-1394 to ATA bridge chip or MP3 Decoder) Low-power 3.3V operation Fully compatible with native USB mass storage class drivers Cypress mass storage class drivers available for Windows (98SE, ME, 2000, XP) and Mac OS X operating systems ----------------------------------------------------- dangnhapweb@gmail.com dt:0936388943