View Single Post
Old 10-12-2012, 11:27 PM   #2
qloi
Đệ tử 3 túi
 
Tham gia ngày: Sep 2010
Bài gửi: 55
:
Trích:
Nguyên văn bởi tienrau2 View Post
mình mới học VDK về Pic, làm đồ án mạch đồng hồ số dùng PIC 16F887A và DS1307. Viết được đoạn code nhận thời gian từ DS1307 và hiển thị lên Led, nhưng sao cái mô phỏng nó chạy chậm quá. Không đúng với đồng hồ mình so sánh ở máy tính. Mấy bạn xem giùm mình với nha. Có thể sữa ở chỗ nào?
Code:
#include <16F877A.h>
#FUSES NOWDT, HS, NOPUT, PROTECT, NODEBUG, NOBROWNOUT, NOLVP
#use delay(clock=20000000)
#use i2c(master,fast,sda=pin_d7,scl=pin_d6)

unsigned char sec,min,hour,day,month,year,date;
unsigned char a[10]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x9 0};
unsigned char sec1,sec2,min1,min2,hour1,hour2,day1,day2,month1,m onth2,year1,year2;
///////////define//////
void update_time();
void display1();
void main()
{
while (1) {
update_time();
display1();
}
}
void update_time() {
i2c_start();
i2c_write(0xD0); //Gui dia chi cua slave
i2c_write(0x00); //thiet lap lai con tro - set register pointer
i2c_stop();
I2C_start();
I2C_write(0xD1); /* gui lenh doc du lieu */
sec = i2c_read(1);
min = i2c_read(1);
hour = i2c_read(1);
date =i2c_read(1);
day = i2c_read(1);
month = i2c_read(1);
year = i2c_read(0);

i2c_stop();
sec1=sec & 0x0F;
sec2=(sec & 0x70)>>4;
min1=min & 0x0F;
min2=(min & 0x70)>>4;
hour1=hour & 0x0F;
hour2=(hour & 0x30)>>4;
day1=day & 0x0F;
day2=(day & 0x30)>>4;
month1=month & 0x0F;
month2=(month & 0x10)>>4;
year1=year & 0x0F;
year2=(year & 0xF0)>>4;
}
void display1()
{
output_b(a[sec1]); output_high(pin_c0);//SEC1
delay_us(400); output_low(pin_c0);
output_b(a[sec2]); output_high(pin_c1);//SEC2
delay_us(400); output_low(pin_c1);
output_b(a[min1]); output_high(pin_c2);//SEC1
delay_us(400); output_low(pin_c2);
output_b(a[min2]); output_high(pin_c3);//SEC2
delay_us(400); output_low(pin_c3);
output_b(a[hour1]); output_high(pin_c4);//SEC1
delay_us(400); output_low(pin_c4);
output_b(a[hour2]); output_high(pin_c5);//SEC2
delay_us(400); output_low(pin_c5);
output_b(a[day1]); output_high(pin_c6);//SEC1
delay_us(400); output_low(pin_c6);
output_b(a[day2]); output_high(pin_c7);//SEC2
delay_us(400); output_low(pin_c7);
output_b(a[month1]); output_high(pin_d0);//SEC1
delay_us(400); output_low(pin_d0);
output_b(a[month2]); output_high(pin_d1);//SEC2
delay_us(400); output_low(pin_d1);
output_b(a[2]); output_high(pin_d2);//SEC1
delay_us(400); output_low(pin_d2);
output_b(a[0]); output_high(pin_d3);//SEC2
delay_us(400); output_low(pin_d3);
output_b(a[year1]); output_high(pin_d4);//SEC1
delay_us(400); output_low(pin_d4);
output_b(a[year2]); output_high(pin_d5);//SEC2
delay_us(400); output_low(pin_d5);
}
Còn đây là file mô phỏng và code:
Mấy cái này không mô phỏng được đâu , test trực tiếp trên mạch thiệt là được thoy.
__________________
heart.touching.2010@gmail.com!
qloi vẫn chưa có mặt trong diễn đàn   Trả Lời Với Trích Dẫn