Ðề tài: Sửa lỗi
View Single Post
Old 10-10-2008, 12:57 AM   #3
tungnh
Đệ tử 5 túi
 
Tham gia ngày: Sep 2007
Bài gửi: 94
:
Anh ơi em viết hàm con hiển thị số dạng float ra màn hình cụ thể như sau :
Code:
void hienthi( float o, unsigned char a[15])
{
	LCD_cmd4(LCD_homeL1);			// ve dau dong thu 2
	Delay_ms(100);
	_PSV=1;
	PSVPAG = __builtin_psvpage(a);
	idx = 0;
	Delay_ms(50);
	while (a[idx]) {		//Xuat chuoi ra dong thu nhat cua LCD
	LCD_dat4(a[idx++]);
	Delay_ms(1);}
//////// Doi kieu float sang char/////////
  	 i=0;
  	l=0; 
	o=(o*1000)/10;
out=(long int)(o + 0.5);        
ra=out;
        while(out!=0)
            {
           in= (long int)( out%10);
           out=(long int)(out/10);
           i=i+1;
             }

           j=i-1;

          for (k=i;k!=0;k--)
            { 
             doi_mu(j);
             in=(long int)(ra/mu);
             ra=(long int)( ra%mu);
             doi_asci(in);
             s[l]=ch;
             j--;
             l++;
            }  

	LCD_cmd4(LCD_homeL2);			// ve dau dong thu 2
	Delay_ms(100);
		_PSV=1;
	PSVPAG = __builtin_psvpage(s);
	idx = 0;
	Delay_ms(50);
	while (s[idx]) {		//Xuat chuoi ra dong thu nhat cua LCD
	LCD_dat4(s[idx++]);
	Delay_ms(1);}
}
ở hàm main em viết
Code:
int main()
                {
                 init......
	hienthi(t_dat,chuoi1);
                 }
Em viết như vậy nó báo lỗi thế này ( con trỏ báo lỗi ở cuối hàm hienthi()) .
Code:
C:\Documents and Settings\Lenovo\Desktop\lonhiet2.c:183: warning: passing argument 2 of 'hienthi' discards qualifiers from pointer target type
C:\Documents and Settings\Lenovo\Desktop\lonhiet2.c: In function 'hienthi':
C:\Documents and Settings\Lenovo\Desktop\lonhiet2.c:497: internal compiler error: in instantiate_virtual_regs_lossage, at function.c:1442
Còn khi em không viết hàm con hienthi() mà đua thẳng vào hàm main thì nó không báo lỗi nữa ( nếu đưa thẳng vào hàm main thì chương trình sẽ rất dài ) Em sửa từ sáng đến giờ không biết sai ở đâu. ánh giúp em với ( xin lỗi anh vì em mới học nên hỏi hơi nhiều )

thay đổi nội dung bởi: tungnh, 10-10-2008 lúc 01:15 AM.
tungnh vẫn chưa có mặt trong diễn đàn   Trả Lời Với Trích Dẫn